TM 9-2350-247-34
INSTALL VEHICLE COMPARTMENT CAB COVER/INSULATION KIT (SECONDARY KIT)
Continued
0057 00
22. Slide drivers seat cover (1) on drivers seat (2) and install with two ties at back of cover.
23. Remove three existing screws (3) and flat washers (4). Discard screws.
24. Install seat cover assembly (1), three flat washers (4) and new screws (3).
25. Remove 5 right rear nuts (5), 10 flat washers (6), 5 grommets (7), spacers (8), and screws (9) from fiberglass cover at rear
of hull.
26. Install 5 retaining rod clips (10) with 5 screws (9), spacers (8), grommets (7), 10 flat washers (6), and 5 right nuts (5).
0057 00-10