TM 9-2350-247-34
INSTALL VEHICLE COMPARTMENT HEATER KIT II OR III (M548A1) — Continued
0056 00
67. Install clamp (12) on bracket at front of power plant compartment with screw (13), two washers (14), and nut (15).
68. Remove screw (16) and clamp (17) from circuit 400 and 400A leads (18). Discard clamp.
69. Install ground strap (19), circuit 400 and 400A leads (18) and heater wiring harness (20) with new clamp (21), two lock
washers (22) and screw (16).
70. Remove screw (23), two washers (24), and clamp (25) from radio wiring harness (26), ground lead (27) and hull.
71. Install clamp (8) on hull with clamp (25), screw (23), and two washers (24).
0056 00-19
