TM 9-2350-247-34
INSTALL VEHICLE COMPARTMENT HEATER KIT II OR III (M548A1) — Continued
0056 00
NOTE
Apply sealing compound to tapered pipe threads, and antiseize compound to straight thread
fittings.
5.
Remove one screw (5) from base of heater assembly (6). Connect ground strap (7) to heater assembly (6) and install
washer (8) and screw (5) on base of heater.
6.
Install insulated heater cover (9) on heater assembly (6).
7.
Install nipple (10), coupling (11), and nipple (12) in heater fuel inlet.
8.
Install base assembly (13), inlet elbow (14) on heater assembly (6) with two attached duct clamps (15) on heater
assembly (6).
9.
Position insulated base assembly cover (16) on sponson.
10. Install heater assembly (6), cover (9), base assembly (13), insulated control covers (17), with three clamps (18) on carrier.
0056 00-5
