TM 9-2350-247-34
REPAIR WINCH GEARCASE ASSEMBLY (M548A1) — Continued
0043 00
NOTE
There are two types of gearcase covers. Do Step 7 only if gearcase cover has oil seal and sleeve
bearing.
7.
Press oil seal (1) and sleeve bearing (2) from gearcase cover (3). Discard seal and bearing.
8.
Remove four bolts (4), lock washers (5), end cap (6), and gasket (7) from housing (8). Discard lock washers and gasket.
9.
Press oil seal (9) from end cap (6). Discard seal.
10. Remove drive worm gear (10) from housing (8) by turning worm gear counterclockwise.
0043 00-5
