TM 9-2350-247-34
REPAIR TRACK TENSION ADJUSTER Continued
0033 00
NOTE
Install new wiper ring (13) with grooved edge facing out of cylinder toward retaining ring.
9.
Install new packing (12), new wiper ring (13), and new retaining ring (14) in cylinder (2).
10. Apply a light coat of lube oil to piston rod (5).
11. Install piston rod (5) in cylinder (2). Maintain inward pressure on piston rod and rotate clockwise until secure.
12. Install bleeder valve (15) and lube fitting (3) in cylinder (2).
FOLLOW-THROUGH STEPS
1.
Install track tension adjuster (see your -20).
2.
Adjust track tension (see your -10).
END OF TASK
0033 00-8