TM 9-2350-247-34
REPLACE ENGINE (M548A3) Continued
0008 00
44. Install starter relay switch (12), two screws (13), washers (14) and new lock nuts (15) on generator mount (1).
45. Install generator (16), three washers (17), two screws (18) and new lock nuts (19) on mount (1). Have helper assist. Do
not tighten nuts.
46. Install turnbuckle (20), two washers (21), spacer (22), washer (23) and screw (24) on generator (16).
47. Install drive belt (see your -20).
48. Rotate turnbuckle adjusting screw (25) until belt deflection is 0.19 to 0.25 inches (4.8 to 6.4 mm) with a force of 15 to 17
lbs (6.8 to 7.7 kg). Use v-belt tensiometer and yardstick. Tighten lock nut (26).
49. Tighten two lock nuts (19) to 36-38 lb-ft (49-52 Nm) torque.
50. Install ground lead (27), new lock washer (28), screw (29) and nut (30) on generator mount (1).
0008 00-22