TM 9-2350-247-34
REPLACE ENGINE (M548A3) Continued
0008 00
8.
Clean transmission-drive coupling (9) and engine-flywheel spline (10). Apply antiseize compound.
9.
Move transmission (7) onto engine splined coupling (10). Install two screw (4), new lock nuts (5), and four washers (6)
holding transmission (7) to engine flywheel housing (8). Tighten screws to 25-27 lb-ft (34-37 Nm) torque. Have helper
assist.
10. Install ten washers (2) and new lock screws (1) holding transmission to input housing (3). Tighten screws to 38-41 lb-ft
(52-55Nm) torque.
0008 00-13