TM 9-2350-247-20-3
RAISE/LOWER CARGO COMPARTMENT FLOOR PLATES — Continued
0393 00
3.
If rear lifting eyes (7) need to be stowed, remove eight screws (8) that secure lifting eyes on sponson (9). Fasten lifting
eyes in stowed position on hull crossmember (10) (see your -10).
INSTALLATION
NOTE
If adjusting floor plate mounting blocks (6) for high floor position, install seven mounting blocks
on each sponson (9). If adjusting floor plate mounting blocks for low floor position, install four
mounting blocks (6) along front of each sponson. Stow other six mounting blocks on the hull
crossmember (10).
1.
Put 14 floor plate mounting blocks (6) in place. Secure with 28 screws (4) and washers (5).
2.
Put floor plates (3) in place. Secure with 14 spacers (2) and screws (1).
END OF TASK
0393 00-2
