REPLACE CARGO AREA HEATER AND CONTROL BOX MOUNTING Continued

REPLACE CARGO AREA HEATER AND CONTROL BOX MOUNTING Continued - TM-9-2350-247-20-3_398

REPLACE CARGO AREA HEATER FUEL LINES, FITTINGS AND SHIELDS

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
329

TM 9-2350-247-20-3 REPLACE CARGO AREA HEATER AND CONTROL BOX MOUNTING — Continued 0462 00 8. Install assembled cargo area heater (1) and support (2) on cargo door (3). Make sure two bracket pins engage holes in top of cargo door. Secure with two washers (4) and screws (5). 9. Connect wiring harness (6) to cargo area heater (1) and control box (7). 10. Connect ground lead (8) to control box (7). Secure with new lock washer (9) and screw (10). 11. Connect fuel hose elbow (11) to adapter (12). FOLLOW-THROUGH STEPS 1. Connect battery negative lead(s) (WP 0292 00). 2. Start engine (see your -10). 3. Check cargo area heater and control box mounting for proper operation. 4. Stop engine (see your -10). END OF TASK 0462 00-7/8 blank

Privacy Statement
Press Release
Contact