REPLACE VEHICLE COMPARTMENT HEATER AIR DUCTS AND HOSES (KIT II) (M548A1) Continued

REPLACE VEHICLE COMPARTMENT HEATER AIR DUCTS AND HOSES (KIT II) (M548A1) Continued - TM-9-2350-247-20-3_360

REPLACE VEHICLE COMPARTMENT HEATER AIR DUCTS AND HOSES (KIT III) (M548A1)

TM-9-2350-247-20-3 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
296

TM 9-2350-247-20-3 REPLACE VEHICLE COMPARTMENT HEATER AIR DUCTS AND HOSES (KIT II) (M548A1) — Continued 0453 00 15. Install deflector (1), elbow (2), two screws (3), washers (4), and nuts (5) to battery well bulkhead. 16. Install hose (6) and two clamps (7) to tee (8) and elbow (2). 17. Install adapter (9), grille (10), four screws (11), washers (12), and nuts (13) to driver’s seat rear bulkhead. 18. Install intake hose (14) and two clamps (15) to adapter (9) and intake duct (16). FOLLOW-THROUGH STEPS 1. Connect battery negative lead (WP 0292 00). 2. Start heater (see your -10). 3. Check heater for leaks and proper operation. 4. Stop heater (see your -10). 5. Install cab left center floor plate (WP 0394 00). 6. Install top left access grille (WP 0390 00). END OF TASK 0453 00-9/10 blank

Privacy Statement
Press Release
Contact