TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER WIRING HARNESS (M548A1)
Continued
0451 00
REMOVAL
1.
Remove wiring harness connector (1) from control box receptacle (2).
2.
Remove wiring harness connector (3) from heater receptacle (4).
3.
Remove screw (5), two lock washers (6), and wiring harness ground lead (7) from hull. Discard lock washers.
4.
Remove wiring harness circuit 402 lead (8) from fuel pump lead (9).
5.
Remove nine screws (10), lock washers (11), clamps (12), and wiring harness (13) from nine weld nuts (14). Discard
lock washers.
6.
Remove wiring harness (13) from carrier. Remove grommet (15) from wiring harness. Discard grommet.
0451 00-2