TM 9-2350-247-20-3
REPLACE PLATES, STENCILS, DECALS, RUBBER PADS, AND STRAPS — Continued
0440 00
REMOVAL OF RUBBER PADS AND STRIPS
1.
Remove rubber pads and strips by scraping. Discard rubber pads.
INSTALLATION OF RUBBER PADS AND STRIPS
1.
Clean hull surface where pad is to be placed.
2.
Apply thin coat of adhesive to hull and back of new rubber pad.
3.
Allow 10 to 20 minutes to dry. Surface should be tacky, not too sticky. Warmer temperatures mean a shorter drying time.
0440 00-6
