TM 9-2350-247-20-3
REPLACE SHOCK ABSORBER — Continued
0379 00
4.
Secure shock absorber (3) with two nuts (7).
5.
Tighten two nuts (7) to 60-80 lb-ft (8-11 N•m) torque. Secure with two new cotter pins (8).
FOLLOW-THROUGH STEPS
1.
Install road wheel (WP 0361 00).
2.
Road test carrier (WP 0128 00) to check that shock absorber is installed properly.
END OF TASK
0379 00-4
