TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER DEFROSTER, HOSES, AND FANS
(M548A3) — Continued
0432 00
13. Place guard (1) on diffuser duct (2) and secure with four screws (3).
14. Align diffuser duct (2) with defroster duct (4) and install diffuser duct, four washers (5), and screws (6) on carrier.
FOLLOW-THROUGH STEPS
1.
Lower tool compartment access door (see your -10).
2.
Install right center floor plate (WP 0395 00).
3.
Connect both battery negative leads (WP 0292 00).
END OF TASK
0432 00-7/8 blank
