TM 9-2350-247-20-2
REPLACE TRANSMISSION OIL HOSES AND FITTINGS (M548A1) -- Continued
0318 00
11. Connect transmission-to-cooler hose (1) to transmission outlet adapter (2) and tee inlet elbow (3).
12. Install double hose clamp (4) on transmission-to-cooler hose (1) and cooler-to-transmission hose (5). Place clamp on
front hose bracket (6). Secure clamp to bracket with screw (7) and new lock nut (8).
13. Install two clamps (9) on hose(1) and hose(5). Place clamps and filler tube bracket (10) on transmission. Secure clamps
and bracket with washer (11) and screw (12).
14. Install oil high temperature switch (13) in cooler inlet tee (14). Connect circuit 327 lead (15) to switch.
FOLLOW-THROUGH STEPS
1.
Fill transmission with oil (see your PMCS).
2.
Connect battery negative lead (WP 0292 00).
3.
Start and run engine (see your -10).
4.
Check for leaks.
5.
Stop engine (see your -10).
6.
Install power plant bottom access cover (see your -10).
7.
Lower center seat (see your -10).
8.
Install left grille (WP 0390 00).
9.
Install air cleaner (WP 0152 00).
END OF TASK
0318 00-5/6 blank
