TM 9-2350-247-20-2
REPLACE TRANSMISSION WIRING HARNESS (M548A3) -- Continued
0297 00
3.
Connect wiring harness connector (1) to receptacle (2) on transmission (3).
4.
Connect circuit 366 connector (4) to transmission low oil pressure switch (5).
5.
Connect circuit 323 lead (6) to transmission high differential pressure switch (7) on transmission oil filter.
6.
Install 5 clamps (8), 10 washers (9), 5 screws (10), and new lock nuts (11) on 5 brackets (12).
7.
Connect transmission wiring harness connector (13) to receptacle (14) on engine compartment bulkhead.
FOLLOW-THROUGH STEPS
1.
Install center floor plates (WP 0395 00).
2.
Lower center seat (see your -10).
END OF TASK
0297 00-5/6 blank
