TM 9-2350-247-20-1
REPLACE ENGINE OIL FILLER CAP AND TUBE — Continued
0140 00
INSTALLATION
1.
Install rear bracket (1) on engine with two new screws (2) and washers (3).
2.
Install front bracket (4) on engine with two screws (5) and nuts (6).
3.
Install new gasket (7) and elbow (8) on engine with three screws (9) and washers (10).
4.
Install hose (11) on elbow (8) with clamp (12) and screw (13).
5.
Install filler tube (14) on hose (11) with clamp (12) and screw (13).
6.
Secure filler tube (14) to rear bracket (1) with clamp (15), screw (16), and nut (17).
7.
Secure filler tube (14) to front bracket (4) with clamp (18), screw (19), and nut (20).
8.
Install caps retaining chain (21) on filler tube (14) with screw (22) and nut (23).
9.
Place cap (24) on filler tube (14) and turn right to secure.
NOTE
If your carrier has an air compressor, do Step 10 and Step 11.
10. Install compressor outlet hose (25) to filler tube (14) with clamp (26).
11. Install coolant heater outlet hose (27) to filler tube (14) with clamp (28).
0140 00-5
