TM 9-2350-247-20-1COOLANT HEATER MALFUNCTIONS—Continued 0086 002CY1. Install heater harness plug on heater control box jack.2. Remove heater harness plug (1) from heater jack (2).3. Measure voltage between plug (1) pin C (3) and ground. WithHEATER switch on START.4. Does multimeter read at least 17 volts?YESNO2CYN1. Faulty coolant heater harness.2. Notify your supervisor.3CY1. Replace coolant heater (WP 0477 00).2. Verify no faults found.DY1. Remove heater control box (WP 0474 00).2. Measure resistance between lead ends from circuit breakerterminal 17 (1) and ON/OFF/START switch terminal 15 (2) leadends.3. Does multimeter read 0 ohms?YESNODYN1. Repair faulty lead (WP 0294 00).2. Verify no faults found.0086 00-5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business