HI TEMP DIFF OIL INDICATOR MALFUNCTIONS (M548A1)Continued

HI TEMP DIFF OIL INDICATOR MALFUNCTIONS (M548A1)Continued - TM-9-2350-247-20-1_322

HI TEMP DIFF OIL INDICATOR MALFUNCTIONS (M548A1)Continued - TM-9-2350-247-20-1_324

TM-9-2350-247-20-1 Crane (CAB) Components Recovery Vehicle Full Tracked: light Armored M578 (2360-00-439-6242) (EIC:3LA) Manual
Page Navigation
255

TM 9-2350-247-20-1 HI TEMP DIFF OIL INDICATOR MALFUNCTIONS (M548A1)—Continued 0058 00 4CY 1. Repair power harness circuit 27K (WP 0294 00). 2. Verify no faults found. DY 1. Turn MASTER POWER SWITCH OFF. 2. Remove circuit 328/27K plug (1) from HI TEMP DIFF OIL indicator (2). 3. Measure resistance between circuit 328 and ground. 4. Does multimeter read more than 0 ohms? YES NO DYN 1. Remove jumper wire. 2. Install plug on differential oil high temperature thermostatic switch in engine compartment. 3. Replace HI TEMP DIFF OIL indicator assembly (WP 0264 00). 4. Verify no faults found. 2DY 1. Remove engine harness plug (1) from power harness jack (2) at battery box. 2. Measure resistance between engine harness plug (1) pin A (3) and ground. 3. Does multimeter read 0 ohms? YES NO 2DYN 1. Remove jumper wire. 2. Install plug on differential oil high temperature thermostatic switch in engine compartment. 3. Install indicator bulb, gaskets, and lens. 4. Repair engine harness circuit 328 (WP 0294 00). 5. Verify no faults found. 0058 00-5

Privacy Statement
Press Release
Contact