TM 9-2350-247-20-1
SERVICE HEADLIGHTS DO NOT OPERATE—Continued
0036 00
CY
1. Measure resistance between beam selector switch jack (1) pins G
(2) and E (3) and between pins G (2) and F (4). Multimeter
should read 0 ohms once and infinity once.
2. Click beam selector switch and measure resistance between beam
selector switch jack (1) pins G (2) and E (3) and between pins G
(2) and F (4). Multimeter should indicate infinity once and 0
ohms once.
3. Is high beam selector switch operating properly?
YES
NO
CYN
1. Install main harness plug on light
switch jack.
2. Replace beam selector switch
(WP 0273 00).
3. Verify no faults found.
2CY
1. Repair main wiring harness circuit 18 (low beam) or circuit 17
(high beam) (WP 0294 00).
2. Verify no faults found.
0036 00-4
