TM 9-2350-247-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES — Continued
0057 00
ITEM
NO.
INTERVAL
MAN-
HOUR
ITEM TO BE
CHECKED OR
SERVICED
CREWMEMBER
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE
IF:
b. Check track tension and adjust as needed.
Measure track tension as follows:
NOTE
Punch is located in carrier’s tool bag.
c. Insert handle of track pin punch between top of
number two roadwheel and bottom of track. If
handle can be inserted freely and track touches
top of number three roadwheel, track tension is
correct. If handle cannot be inserted freely
between top of number two roadwheel and
bottom of track, track tension is too loose
Tighten track tension, (WP 0058 00).
0057 00-66
