TM 9-2350-247-10
REMOVE/INSTALL POWER PLANT REAR ACCESS COVERS/DOOR AND PANEL
Continued
0036 00
REMOVE LOWER REAR ACCESS COVER (M548A1)
NOTE
Upper rear door must be opened before lower rear cover is removed.
1.
Open upper rear access door.
2.
Remove cargo compartment floor plate (WP 0007 00).
3.
Remove tachometer cable from two clips on inside of lower cover.
4.
Remove six screws and washers. Use socket and socket handle.
5.
Remove lower rear power plant compartment access cover from bulkhead.
INSTALL LOWER REAR ACCESS COVER (M548A1)
1.
Install lower rear power plant compartment access cover on bulkhead with six screws and washers. Use socket and
socket handle.
2.
Install tachometer cable on inside of lower cover with two clips.
3.
Install cargo compartment floor plate (WP 0007 00).
4.
Close upper rear access door.
0036 00-3