TM 9-2350-247-10
MACHINE GUN MOUNTING KITS
0035 00
THIS WORK PACKAGE COVERS:
M66 Mount Controls (page 0035 00-1).
M49A1 Mount Controls (page 0035 00-2).
7.62 MM Machine Gun Mount M60 (page 0035 00-4).
INITIAL SETUP:
Maintenance Level
Operator
Personnel Required
Soldier
References
TM 9-1005-213-10
TM 9-1005-224-10
Equipment Condition
Engine stopped (WP 0023 00), (WP 0024 00)
M66 MOUNT CONTROLS
NOTE
The M66 mount includes an adapter so you can mount a caliber.50 machine gun. The adapter is
stowed under a circular protective cap to the left of the pintle clamping screw.
1.
To remove the machine gun from either mount, remove both cradle pins and lift out the machine gun.
2.
Unlock the brake lever to traverse the mount.
3.
Lock the brake lever to hold the mount in place.
4.
Push the pintle traverse lock down to traverse the pintle.
5.
Pull the pintle traverse lock up to lock the pintle in place.
0035 00-1
