| |
TM 9-2350-287-34
4-4. LOWER FUEL TANK REPLACEMENT (continued).
6.
Position retaining strap (3) in place on top of fuel tank (4). Measure gap between retaining strap (3) and top
of fuel tank (4). If gap is greater than 3/16 inch, remove two screws (1), washers (2), and retaining straps (11
and 12).
7.
Position mounting end of retaining strap(11 ) under mounting end of retaining strap(12) and secure to hull with
two screws (1) and washers (2).
8.
Install retaining strap (3) on fuel tank (4) with two screws (1) and washers (2).
9.
Secure hose (8) to hull (5) with clamp (9) and screw (10).
FOLLOW-ON MAINTENANCE
Connect hoses, tubes, and fittings (refer to TM 9-2350-287 -20-1).
Install fuel pumps (refer to TM 9-2350-287-20-1).
Install fuel level transmitter (refer to TM 9-2350-287-20-1).
Install air cleaner duct and elbow (refer to TM 9-2350-287-20-1).
Install exhaust duct and pipe (refer to TM 9-2350-287-20-1).
l Fill fuel tanks (refer to TM 9-2350-287-10).
l Install powerpack (refer to TM 9-2350-287-20-1).
4-11
|