|
| |
TM 9-2350-287-34
11-4 HYDRAULIC ACTUATOR REPAIR (continued).
7.
8.
9.
Hydraulic fluid can cause skin rash. Wear gloves when handling hydraulic fluid. If it
gets on skin or clothing, wash with soap and water.
Install new packing (7) and new retainer (8) on end cap (1). Lubricate packing (7) and retainer (8) with hydraulic
fluid.
Install two new retaining rings (11), T-seal (12), and ring (13) in gland (3).
Install new retainer (10) and new packing (9) on gland (3). Lubricate retainer (10)
hydraulic fluid.
and packing (9) with
10.
Install end cap (1) and gland (3) on actuator (6) with port holes (22) facing in the same direction.
11.
Install four tie rods (2) through end cap (1) and gland (3).
11-16
|
