|
| |
TM 9-2350-287-34
9-2. UPPER REAR DOOR SMALL DOORS AND HINGE REPLACEMENT (continued).
WARNING
Do not use dry-cleaning solvent near upper rear door and upper rear door small doors until doors
are cool to the touch. Failure to follow this warning may result in severe injury or death to personnel.
Dry-cleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles and gloves,
and use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT
use near open flame or excessive heat.
6.
Clean mounting surfaces of upper rear door (2) and upper rear door mounting doors (11 and 14) with dry-cleaning
solvent to remove all old adhesive and seal residue.
WARNING
Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesive gets on skin or clothing, wash immediately with soap
and water.
7.
Apply adhesive to two new seals (10 and 15), and install seals (10 and 15) on upper rear door small doors (11 and 14).
8.
Apply adhesive to two new seals (4), and install two seals (4) on upper rear door (2).
9-5
|
