|
| |
TM 9-2350-287-34
8-2. ROADWHEEL ARM ASSEMBLY REPAIR (continued).
a.
DISASSEMBLY
1.
Remove two screws (11) and housing (1) from upper spindle (9).
2.
Remove preformed packing (3) and seal (2) from housing (1). Discard preformed packing and seal.
3.
Straighten tangs on keywasher (5).
4.
Using socket wrench, remove self-locking nut (4) from spindle (9).
5.
Remove
6.
Remove
7.
Remove
keywasher (5), hub spacer(6), inner bearing (7), and race (8) from spindle (9). Discard keywasher.
bearing spacer (15), outer bearing (14), race (13), and retainer (12) from spindle (9).
seal (10) from spindle (9). Discard seal.
8 - 2
|
