|
| |
TM 9-2350-287-34
5-2. COOLING FAN DRIVE ASSEMBLY REPAIR (continued).
NOTE
Preform step 2 only if bearing (34) is new.
2.
Using arbor press, install bearing (34) on drive shaft (33).
3.
Install drive shaft (33) in fan drive housing (30).
4.
5.
Use care when installing retaining rings. They are under spring tension and can act
as projectiles when released.
Wear safety goggles when installing retaining rings.
Failure to heed this warning can result in serious injury to personnel.
Using arbor press, install bearing (29) and new retaining ring (28) on drive shaft (33).
install new shims (39), new preformed packing (38), and housing cover (37) on fan drive housing (30) with
six screws (36). Install new retaining ring (35) on bearing (34).
5-7
|
