|
| |
TM 9-2350-287-20-2
21-8.
ENGINE AFES CYLINDER BOTTLE BRACKET STRAPS, BRACKETS, AND MOUNTS
REPLACEMENT (continued).
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Install shims (41) between support (20) and bracket (34), as required to maintain vertical position of support
(20), and secure with two screws (42), new Iockwashers (36), four washers (35), and two nuts (37).
Tighten screws (40 and 44) to secure brackets (30 and 34) and support (20) in vertical position.
Position mount (17) on hull with two screws( 19) new Iockwashers (18).
Position cylinder bottle bracket (21) on mount (17) and support (20), and aline all mounting holes.
Install cylinder bottle bracket (21) from support (20), and tighten two screws (19) on support (20).
Install cylinder bottle bracket (21) on support (20) and mount (17) with two screws (28) and nuts (23) and four
new Iockwashers (22).
Install mount (1) on hull with two screws (4), new Iockwashers (2), and washers (3).
Position electrical wiring harness (5) on mount (1). Install clamp (6) on mount (1) with screw (9), new
Iockwasher (8), and washer (7).
Install cylinder bottle bracket (10) on mount (1) with four screws (1 5) and new Iockwashers (16).
Install four bracket straps (12 and 25) on two cylinder bottle brackets (10 and 21 ) with eight pins (11 and 24),
FOLLOW-ON MAINTENANCE:
Install engine AFES cylinder bottles (para 21-4).
Activate engine AFES (para 21-2).
21-28
washers (13 and 26), new cotter pins (14 and 27).
|
