| |
TM 9-2350-287-20-2
20.1-4. GPS CABLE ASSEMBLY (12967937) REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
MASTER switch set to OFF (refer to
General mechanic's tool kit (Item 24,
TM 9-2350-287-10).
Appendix I)
Equipment Conditions:
Vehicle parked on level ground (refer to
TM 9-2350-287-10).
a.
REMOVAL
1.
Disconnect GPS cable assembly 12967937 (2) from GPS unit (3).
2.
Disconnect cable assembly 12967937 (2) from cable assembly 12967967-2 (1).
3.
Remove two screws (7), washers (6), and clamps (5) and cable assembly 12967937 (2) from GPS mounting plate
(4).
b.
INSTALLATION
1.
Install two clamps (5), washers
(6), and screws (7) and cable
assembly
12967937
(2)
on
GPS mounting plate (4).
2.
Connect
cable
assembly
12967937
(2)
to
cable
assembly 12967967-2 (1).
3.
Connect
cable
assembly
12967937 (2) to GPS unit (3).
FOLLOW-ON MAINTENANCE:
None
Change 1 20.1-5
|