|
| |
TM 9-2350-287-20-2
18-24. APU CABLE ASSEMBLY (11671371) REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
. General mechanic’s tool kit (Item 24,
. Vehicle parked on level ground (refer to
Appendix I)
TM 9-2350-287-10).
. MASTER switch set to OFF (refer to
Materials/Parts:
TM 9-2350-287-10).
. Sealant adhesive (Item 6, Appendix D)
. Battery ground cables disconnected
(para 7-41).
a.
1.
2.
3.
REMOVAL
Disconnect lead No. 493 (2) from wiring
harness 12329650 (3).
Disconnect lead No. 493 (2) from high
air temperature switch (1).
Remove APU cable assembly
11671371 from vehicle.
INSTALLATION
WARNING
Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesive gets on skin or clothing, wash immediately with soap and
water.
NOTE
Seal all exposed terminals with sealant adhesive.
1.
Install APU cable assembly 11671371 in vehicle.
2.
Connect lead No. 493 (2) to high air temperature switch (1).
3.
Connect lead No. 493 (2) to wiring harness 12329650 (3).
FOLLOW-ON MAINTENANCE:
. Connect battery ground cables (para 7-41).
18-62
b.
|
