|
| |
TM 9-2350-287-20-2
18-14. APU PANELS REPLACEMENT (continued).
11.
Remove two screws (29), Iockwashers (28) and washers (27) from each of three brackets (30) and remove
three brackets (30) from vehicle hull. Discard Iockwashers.
12.
Inspect hook and pile fasteners (31) and replace if damaged.
b.
INSTALLATION
1.
Peel backing from hook and pile fastener (31) and install hook and pile fastener (31) on bracket, if removed.
2.
Install three brackets (30) on vehicle hull with two screws (29) new Iockwashers (28) and washers (27) for each
bracket (30).
3.
4.
Install panel duct (26) on APU duct (4) with five screws (23), new Iockwashers (24) and washers (25).
Install top panel (22) and retainer (21) on APU duct (4) with five screws (19) and new Iockwashers (20).
18-38
|
