|
| |
TM 9-2350-287-20-2
17-5. UPPER SUPPORT QUICK-RELEASE PIN AND HANDLE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
l General mechanic’s tool kit (Item 24,
Appendix I)
Equipment Conditions:
l Vehicle parked on level ground (refer to
TM 9-2350-287-10)
l Conveyor stowed (refer to
TM 9-2350-287-10).
a.
REMOVAL
1.
2.
3.
4.
b.
1.
2.
3.
5.
NOTE
This procedure applies to both left support and right support.
Remove friction handle (4) from collar (5).
Remove screw (1) and rope (2), with quick-release pin (6) and S-hook (3) attached, from collar (5).
Remove rope (2) from ring (7) on quick-release pin (6).
Bend open S-hook (3) and remove from end of rope (2).
INSTALLATION
Install S-hook (3) on end of rope (2) and bend S-hook (3) closed.
Install other end of rope (2) on ring (7) on quick-release pin (6).
Install rope (2), with S-hook (3) and quick-release pin (6) attached, on collar (5) with screw (1).
Install friction handle (4) on collar (5).
17-6
|
