|
| |
TM 9-2350-287-20-2
16-2.
HEATING AND VENTILATING DUCTS REPLACEMENT (continued).
a.
1.
2.
3.
4.
5.
6.
b.
1.
2.
3.
4.
5.
6.
REMOVAL
Remove antirecoil plug (4) from heating and ventilating duct (7).
Remove two screws (1), Iockwashers (2), and washers (3) from duct (7) and vehicle floor. Discard
Iockwashers.
Remove four screws (5) and Iockwashers (6) from duct (7) and heating and ventilating duct (8). Discard
Iockwashers.
Remove duct (7) from duct (8) and vehicle floor.
Remove four screws (11), Iockwashers (10), and washers (9) from duct (8) and vehicle floor. Discard
Iockwashers.
Remove duct (8) from vehicle floor.
INSTALLATION
Position heating and ventilating duct (8) in place on vehicle floor with mounting holes alined.
Secure duct (8) to vehicle floor with four screws (11), new Iockwashers (10), and washers (9).
Position heating and ventilating duct (7) in place on vehicle floor with mounting flange over duct (8).
Secure duct (7) to duct (8) with four screws (5) and new Iockwashers (6).
Secure duct (7) to vehicle floor with two screws (l), new Iockwashers (2), and washers (3).
Install antirecoil plug (4) on duct (7).
16-2
|
