| |
TM 9-2350-287-20-2
15-92. TELEPHONE HAND REEL REPAIR (continued).
b.
1.
2.
3.
4.
5.
c.
1.
2.
3.
4.
5.
d.
1.
2.
3.
DISASSEMBLY
Remove retaining ring (15), washer (14), and
sleeve (13) from lever (12).
Remove cotter pin (9), pin (10), lever (12), and
spring (11) from hand crank assembly (6).
Discard cotter pin.
Remove two retaining rings (16) from bearing
(18).
Remove screw (20) and plate (19) from housing
(17).
Separate housing (17) from bearing (18).
ASSEMBLY
Install housing (17) on bearing (18).
Install plate (19) and screw (20) on housing
(17).
Install two retaining rings (16) on bearing (1 8).
Install spring (11 ), lever (1 2), pin (10), and new
cotter pin (9) on hand crank assembly (6).
Install sleeve (13), washer (14), and retaining
ring (15) on lever (1 2).
INSTALLATION
Install reel assembly (1) and bearing assembly
(8) on mount (2).
Install two clamps (5) on mount (2) with two
screws (3) and new Iockwashers (4).
Install hand crank assembly (6) in reel assembly
(1) with new cotter pin (7).
FOLLOW-ON MAINTENANCE:
None
15-244
|