|
| |
TM 9-2350-287-20-2
10-4. DRIVER’S COMPARTMENT BRAKE ASSEMBLY REPAIR (continued).
4.
Remove Iockwire (13) from retainer plate (14). Discard Iockwire.
5.
Unscrew retainer plate(14) from end of supporl (4), and remove seal (6) from end of support (4). Discard seal.
6.
Disconnect two electrical connectors (16)
from brake warning light switch (17).
7.
Remove four screws (20), Iockwashers (19),
and washers (18) from driver’s bulkhead.
Discard Iockwashers.
NOTE
Record number and location of shims
to ensure proper installation.
Remove brake assembly (21) and shims
(15) from driver’s compartment.
10-11
|
