| |
TM 9-2350-287-20-2
15-62. DRIVERS SEAT REPAIR (continued).
4.
Install spring (13) on drivers seat vertical guide (14).
5.
With assistant, install drivers seat assembly (3) and seat support (11) on vertical support (5).
WARNING
Drivers seat assembly is spring loaded. Remain in drivers seat whenever a change
in position is required. Failure to do so may result in injury to personnel.
6.
Install two drivers seat stops (7 and 17) on vertical support (5) with two screws (6).
7.
Check for travel and firm locking with adjusting lever in various positions (12). Correct travel binding or
looseness by removing or installing shims (subpara b, step 13).
FOLLOW-ON MAINTENANCE:
close driver's hatch (refer to TM 9-2350-287-10).
15-155
|