|
| |
TM 9-2350-287-20-2
15-50. MACHINE GUN SUPPORT ASSEMBLY REPAIR (continued).
b.
DISASSEMBLY
1.
Remove two cotter pins (7) from straight pin (10). Discard cotter pins.
2.
Drive out straight pin (10) from support (6).
3.
Remove quick-release pin (13) and connecting link (12), with chain (14) attached, from support (6).
4.
Remove two S-hooks (11), chain (14), and quick-release pin (13) from connecting link (12).
5.
Remove cotter pin (4), cover (16), spring (5), and lock (9) from support (6). Discard cotter pin.
6.
Drive out two spring pins (8) from support
7.
Drive out spring pin (15) from support (6).
(6). Discard spring pins.
Discard spring pin.
c.
CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
1.
Clean all hardware with drycleaning solvent and rag. Allow to air dry.
2.
Inspect all parts for cracks and other damage. Replace unserviceable parts.
15-126
|
