|
| |
TM 9-2350-287-20-2
15-43. AFES FIRE EXTINGUISHER BOX ASSEMBLY REPAIR (continued).
e.
INSTALLATION
1.
Attach sling to two lifting eyes (1).
2.
Attach sling to hoist and take up slack.
WARNING
Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-
ventilated area. If adhesive gets on skin or clothing, wash immediately with soap and
water.
3.
Apply sealant adhesive to mounting surfaces of AFES fire extinguisher box assembly (4) and rear wall of
vehicle hull.
WARNING
AFES fire extinguisher box assembly is heavy. To prevent injury, make sure box
assembly is properly supported when lifted.
4.
With the help of assistant, raise and position
AFES fire extinguisher box assembly (4) in
place on rear wall of vehicle hull.
5.
Install 13 screws (2) and new Iockwashers
(3) in AFES fire extinguisher box assembly
(4) and rear wall of vehicle hull.
6.
Remove
(1).
sling and hoist from two lifting eyes
FOLLOW-ON MAINTENANCE:
• Install crew AFES cylinder bottles (para 21-5).
15-107
|
