|
| |
TM 9-2350-287-20-2
15-42. FUEL FILL DOOR REPLACEMENT.
This Task Covers:
a. Removal
b. Disassembly
c. Cleaning and Inspection
d. Assembly
e. Installation
Initial Setup:
Tools/Test Equipment:
• General mechanic’s tool kit (Item 24,
Appendix 1)
Materials/Parts:
• Drycleaning solvent (item 28, Appendix D)
• Rag (Item 56, Appendix D)
• Lockwasher (1 O) (Item 161, Appendix H)
• Lockwasher (Item 167, Appendix H)
Equipment Conditions:
• Vehicle parked on level ground
(refer to TM 9-2350-287-10).
• Fuel fill door opened (refer to
TM 9-2350-287-10).
a.
1.
2.
3.
b.
1.
2.
3.
REMOVAL
Remove nut (8), Iockwasher (7), two washers (5), and screw (4) from hull-mounted bracket (6) and fuel fill door
(17). Discard Iockwasher.
Remove fuel fill door (17) and four bronze bearing washers (12) from hull-mounted bracket (6).
NOTE
For proper installation, record the position and number of washers removed with
strike.
Remove two screws (1), striker (2), and washers (3) from hull.
DISASSEMBLY
Remove four screws (15) and Iockwashers (16) and pull handle (14) from fuel fill door (17). Discard
Iockwashers.
Remove four screws (13), Iockwashers (10), and nuts (9) from rim lock (11) and fuel fill door (1 7). Dismal
Iockwashers.
Remove two screws (21 ) and Iockwashers (20), rim lock (11), and two spacer plates (18 and 19) and fuel fill
door (17). Discard Iockwashers.
15-102
|
