|
| |
TM 9-2350-287-20-2
15-26. RIGHT CANISTER DOOR AND PERSONNEL SIDE DOOR LATCH ASSEMBLY
REPLACEMENT (continued).
2.
Inspect all parts for cracks, bends, or other damage. Replace any unserviceable parts.
d.
ASSEMBLY
1.
Install shims (12) and two strikers (11 ) on two brackets (13) with four screws (16), new Iockwashers (15), and
washers (14).
2.
Install shims (4) and two latch assemblies (3) on plate (5) with eight screws (1) and new Iockwashers (2).
e.
INSTALLATION
1.
Install plate (7) on hull with three screws (6).
2.
Install plate (5) on plate (7) with four screws (10), new Iockwashers (9), and washers (8).
3.
Close right canister door and personnel side door (refer to TM 9-2350-287-10). If two strikers (11 ) properly
contact two latch assemblies (3), door is properly adjusted. If two strikers (11) do not properly contact latch
assemblies (3), go to step 4.
4.
open right canister door and side personnel door (refer to TM 9-2350-287-10). Remove four screws (16),
Iockwashers (15), and washers (14), shims (12), and two strikers (11) from two brackets (13). Add or remove
shims (12) as necessary; then install two strikers (11) and shims (12) on two brackets (13) with four screws
(16), Iockwashers (15), and washers (14).
• Close right canister door (refer to TM 9-2350-287-10).
• Close personnel side door (refer to TM 9-2350-287-10).
15-61
|
