|
| |
TM 9-2350-287-20-2
15-26. RIGHT CANISTER DOOR AND PERSONNEL SIDE DOOR LATCH ASSEMBLY
REPLACEMENT.
This Task Covers:
a. Removal
b. Disassembly
c. Cleaning and Inspection
d. Assembly
e. Installation
Initial Setup:
Tool/Test Equipment:
Equipment Conditions:
• GeneraI mechanic’s tool kit (Item 24,
• Vehicle parked on level ground (refer to
Appendix 1)
TM 9-2350-287-1 O).
• Personnel side door opened and secured
Materials/Parts:
(refer to TM 9-2350-287-10).
• Drycleaning solvent (Item 28, Appendix D)
• Right canister door opened and secured
• Lockwasher (4) (Item 164, Appendix H)
(refer to TM 9-2350-287-10).
• Lockwasher (12) (Item 196, Appendix H)
a.
1.
2.
b.
1.
2.
c.
REMOVAL
Remove four screws (1O), Iockwashers (9), and washers (8) and plate (5) from plate (7). Discard Iockwashers.
Remove three screws (6) and plate (7) from hull.
DISASSEMBLY
NOTE
For proper assembly, record the number and thickness of shims.
Remove eight screws (1) and Iockwashers (2), two latch assemblies (3), and shims (4) from plate (5). Discard
Iockwashers.
Remove four screws (16), Iockwashers (15), and washers (14), shims (1 2), and two strikers (11) from two
brackets (13). Discard Iockwashers.
CLEANING AND INSPECTION
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
1.
Clean all parts with drycleaning solvent. Allow to air-dry.
15-60
|
