|
| |
TM 9-2350-287-20-2
15-17. TOP LEFT DOOR REPLACEMENT (continued).
4.
5.
6.
7.
8.
Install new seal (7) and seal retainer (8) on top left door (5) with five screws (4) and new lockwashers (3).
Install two new seaIs (1) and seal retainers (2 and 9) on top left door (5) with six screws (4) and new
Iockwashers (3).
Position shims (13) on mounting surface of hull.
2.
3.
Personnel must stand clear during lifting operations. A swinging or shifting load may
cause severe injury.
NOTE
An assistant is needed to help
aline hinges with shims and
mounting surfaces of hull.
Using hoist, lift top left door (5)
into position on hull. With
assistant, aline holes in two
hinges (12) with holes in shims
(13) and hull.
Secure shims (13) and two
hinges (12) to hull and top left
door (5) with eight new
Iockwashers (11) and four
screws (10).
Allow top left door (5) to close. If
door does not appear to be
straight or binds when closing,
loosen four screws (10) and
maneuver top left door (5) until
it opens and closes without
binding.
Remove chain from
lifting lug (6).
Install hold-open bar (16) on top
left door (5) with screw (18), two
washers (15), and new self-
Iocking nut (14).
FOLLOW-ON-MAINTENANCE:
• Close top middle door (refer to TM
9-2350-287-10).
15-36
|
