| |
TM 9-2350-287-20-2
15-11. FRONT AND SIDE HULL SLOPE PLATES REPLACEMENT (continued).
3.
Remove two screws (5), washers (7), and self-locking nuts (9) and transmission door bracket (6) from front
hull slope plate (8) and hull. Discard self-locking nuts.
4.
Remove seven screws (11 ) and washers (10) from front hull slope plate (8).
5.
Remove three screws (13) and washers (12) from front hull slope plate (8) and side hull slope plate (16).
6.
Loop sling around front hull slope plate (8). Attach sling to hoist, and take up slack.
WARNING
Personnel must stand clear during lifting operations. A swinging or shifting load can
cause Injury.
CAUTION
When setting front hull slope plate on work surface, keep weight off engine compartment
fire-sensing element. Element can be damaged.
7.
Lift front hull slope plate (8) from vehicle, and place on suitable work surface. Remove sling and hoist from
front hull slope plate (8).
15-22
|