|
| |
TM 9-2350-287-20-2
15-6. FAN ACCESS DOOR REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
•Five-ton hoist (Item 23, Appendix I)
• Air intake grille opened and secured
• General mechanic’s tool kit (Item 24,
(refer to TM 9-2350-287-10).
Appendix I)
• Exhaust deck removed (para 15-8).
• Suitable chain
• Engine compartment fire-sensing
element disconnected (para 21-9).
Personnel Required: Two
a.
1.
2.
3.
b.
1.
2.
REMOVAL
Remove six screws (1) and washers (2) from fan access door (4).
WARNING
Attach suitable chain to two handles (3) and hoist, and lift door (4) from vehicle.
CAUTION
When setting fan access door on work surface, keep weight off engine fire-sensing
element Element can be damaged.
Place door (4) on a suitable work surface, and remove hoist and chain from door (4).
INSTALLATION
Attach chain to hoist and two handles (3), and take up slack.
WARNING
Personnel must stand clear during lifting operations. A swinging or shifting load can
cause injury.
NOTE
An assistant is needed to help aline holes in fan access door with holes in vehicles.
Position door (4) on vehicle, alining holes in door (4) with holes in vehicles.
15-14
|
