| |
TM 9-2350-287-20-2
15-2. AIR INTAKE GRILLE REPLACEMENT (continued)
5.
6.
7.
8.
9.
10.
11.
12.
13.
Install adapter (27) and shield (28) on intake grille (1) with three screws (29).
WARNING
Personnel must stand clear during lifting operations. A swinging or shifting load can
cause injury.
NOTE
An assistant is needed to help position intake grille on vehicle.
Install air intake grille (1) on vehicle, alining holes in three tube clamps (26) with holes in vehicle.
Install four screws (30) in three tube clamps (26).
Using hoist, close intake grille (1).
Install four screws (25) in rear of three tube clamps (26).
Install right end cap (21) on hull with four screws (15).
Using hoist, open intake grille (1) until it is perpendicular to front deck of vehicle.
NOTE
Intake grille may have to be maneuvered past perpendicular position to install torsion
bar.
Install torsion bar (16) on vehicle through right end cap (21).
Install anchor (20) on right end cap (21) with two screws (19), washers (22) and new self-locking nuts (23).
15-8
|