TM 9-2350-287-20-1
8-2.
SHIFT CONTROL LINKAGE REPAIR (continued).
d.
ASSEMBLY
WARNING
Use care when installing spring. Spring is under tension; it can act as a projectile
when released and cause severe eye injury.
1.
Apply lubricant (MIL-L-23396) to pin (76) and plunger (69) surfaces that will make contact with surfaces of adapter
bushing (70).
2.
Install pin (76), spring (75), and new spring pin (74) in bellcrank (71).
3.
Install bellcrank (71) in control assembly (24) with hollow pin (73) and new spring pin (72).
4.
Install plunger (69) and neutral safety switch (21) in adapter bushing (70). Install adapter bushing (70) in control
assembly (24).
5.
Apply lubricant (Everlube 620) to shaft (67).
6.
Install shaft (67) and link (66) on control assembly (24) with two shafts (65) and new spring pins (68).
Change 1 8-9