TM 9-2350-287-20-1
7-80.1. MOUNTED WATER RATION HEATER (MWRH) POWER CABLE (12447321) REPAIR (continued).
c.
ASSEMBLY
1.
Install cable clamp adapter (17) on connector (16).
2.
Install shell (6), washer (7), and contact (8) on lead (5).
3.
Install terminal (10) on ground lead (12).
4.
Assemble each power cable branch with new wires.
5.
Return power cable branches to original position.
6.
Install section of electrical tape on power cable.
d.
INSTALLATION
1.
Position power cable 12447321 (1) in vehicle.
2.
Connect connector (16) of power cable 12447321 (1) to the MWRH.
NOTE
Lubricate rubber-to-rubber mating surfaces of electrical connectors with silicone
compound.
3.
Connect lead (5) of power cable 12447321 (1) to connector of wiring harness 12330252-2.
4.
Secure ground lead (12) to hydraulic control panel (2) using screw (11) and two new lockwashers (9).
5.
Secure power cable 12447321 (1) to hydraulic control panel (2) using clamp loop (13), screw (15), new
lockwasher (14), two washers (3), and nut (4).
FOLLOW-ON MAINTENANCE:
.None
Change 1 7-260.3/(7-260.4 blank)