TM 9-2350-287-20-1
7-67. FRONT NATO INTERVEHICULAR SLAVE CONNECTOR REPLACEMENT (continued).
3.
4.
5.
6.
b.
1.
2.
3.
4.
5.
6.
7.
Pull off cap (12) from connector (13).
Remove four screws (11), washers (6), Iockwashers (5), nuts (4) and cord of cap (12) from bracket (1).
Pull connector (13) out of bracket (1) and remove screw (10), Iockwasher (9), and negative electrical lead 50A
(8) from connector (13). Discard Iockwasher.
Remove connector (13), gasket (7) and insulator pIate (2) from bracket(1).
INSTALLATION
Install insulator plate (2), gasket (7) and connector (13) with positive (+) lug on top in bracket (1).
Connect negative electrical lead 50A (8) to bottom negative lug of connector (13) with new Iockwasher (9) and
screw (10).
Install connector (13) and cord of cap (12) on bracket (1) with four new Iockwashers (5), nuts (4), washers (6)
and screws (11).
Install cap (12) on connector (13).
Install new insulation sleeving (3) over electrical leads 49A and 50A (14 and 8).
Connect positive electrical lead 49A(14) to top positive lug of connector (13) with new lockwasher (9) and
screw (10).
Install insulation sleeving (3) over electrical leads 49A and 50A (14 and 8).
7-204