TM 9-2350-287-20-1
7-53. POWERPACK WIRING HARNESS MOUNTING BRACKET REPLACEMENT
(continued).
b.
INSTALLATION
1.
Install bracket (13) on transmission (11 ) with two screws (6) and new Iockwashers (7). Torque screws between
26 and 32 lb (36 and 44 Nm).
2.
Install three electrical receptacles (5, 8, and 14) in bracket (13) with 12 screws (4), washers (3), new
Iockwashers (2), and nuts (l).
3.
Connect wiring harness (10) to electrical receptacle (5) on bracket (13).
4.
5.
Connect
Connect
wiring
wiring
harness
harness
(9) to electrical receptacle (8) on bracket [13).
FOLLOW-ON MAINTENANCE:
l Connect battery ground cables (para 7-41).
l Close transmission access doors (refer to TM 9-2350-287-10).
7-162
(12) to receptacle (14) on bracket (13).